How to mix classic rock vocals

4th May 2011 | 10:11

How to mix classic rock vocals
How to produce great rock vocals

Rock vocals come in so many different shapes and sizes that there are no set rules for processing them. However, there are still some general techniques you can apply to get the foundations right. We’ve got a big vocal to play with here - which is a good place to start!

Next: Six steps to great rock vocals

How to mix classic rock vocals
Aggressive EQing

Step 1: To get a powerful vocal like this sounding suitably rock-like, you need to be aggressive. We EQ it, boosting the highs dramatically and cutting out a good chunk of the lows. We need our singer coming in nice and hot, and this will do the trick.

How to mix classic rock vocals
Compression and limiting

Step 2: Likewise, you can hit the compression really hard to get a powerful, pumping vocal. We go for a Ratio of just below 5:1, with slow Attack and medium Release, and a good dose of Make-Up gain. A limiter probably wouldn’t hurt either if your singer has a big voice.

How to mix classic rock vocals
Distort it!

Step 3: Nothing will help you get a classic rock sound quicker than putting your vocals through some distortion. NI’s Guitar Rig 3 works great on guitars, but is just as effective on other sources, including vocals. We use it as a send effect to give our singer a bit of crunch.

How to mix classic rock vocals
Pull it back?

Step 4: Sometimes things are a bit less intense and you need to tone down that huge sound a little to preserve the dynamics. We switch vocals to something quieter and with more dynamic range, then pull back the processing a little, and add some reverb.

How to mix classic rock vocals
'60s layered vocals

Step 5: Aiming for an old-school, ‘60s-style vocal? Layer a couple of different takes, then EQ out the highs and lows and boost the mids. You won’t need a huge amount of compression, but a little reverb and delay will go a long way towards achieving this effect.

How to mix classic rock vocals
Demonic metal

Step 6: No guide to rock vocals would be complete without some demonic metal. We turn our first vocal into a seething hell-beast by layering up a number of different compressed vocal takes and sending them all to an auxiliary track with Guitar Rig 3 loaded onto it. We also spike the EQ at around 80Hz to give it some grunt.

Share this Article
Google+

Most Popular

Edition: UK
TopView classic version