How to make a filthy electro sound in Reason 4

4th Nov 2009 | 12:08

How to make a filthy electro sound in Reason 4
The mighty Thor

Step 1: The key to getting the kind of dirty electro sounds made popular by the likes of Boys Noize, Justice and SebastiAn is distortion. Reason 4 has an excellent distortion unit in Scream 4, which can be used with the software’s synths to create some fantastically filthy noises. Start by creating a Thor Polysonic Synthesizer.

How to make a filthy electro sound in Reason 4
Scream 4

Step 2: Right-click the synth and select Initialize Patch. This will give us a blank canvas to work on. We already know that we want to use a distorted sound, so let’s add a Scream 4 unit right away - right-click the Thor synth and select Create»Scream 4 Distortion.

How to make a filthy electro sound in Reason 4
Making it mono

Step 3: Set the Scream 4 unit to Tube mode. We want our sound to be monophonic, so set Thor’s Keyboard Mode to Mono Retrig - this means we can only play one note at a time, with the envelope resetting on each new note. Switch the Portamento mode On to make the pitch slide between notes smoothly.

How to make a filthy electro sound in Reason 4
Creating the vocal sound

Step 4: Next, click Thor’s Show Programmer button and copy the cutoff Frequency and Resonance settings shown in the filter section here. Turn the Scream 4’s Damage Control knob fully up. This combination of resonance and distortion gives a satisfying vocal-style synth noise.

How to make a filthy electro sound in Reason 4
Hip to be square (wave)

Step 5: We can get an even more vocal-like effect by switching Thor’s saw wave to a square. Also, turning up the Filter Envelope’s Attack time (to, say, 30ms) gives a more interesting start to the sound, as the resonant filter cutoff moves up through a range of frequencies before entering the decay phase, when it moves back down again.

How to make a filthy electro sound in Reason 4
Adding a beat

Step 6: To get a big, pumping sound, we’ll use sidechain compression. First we need a beat, so we create a basic kick and snare pattern using Redrum’s Hip Hop Kit 03. Place slot 1’s kick on every quarter-note beat (as shown) and turn its Length down to one o’clock. Then put the slot 7’s snare on top of every other kick and turn the Level fully up.

How to make a filthy electro sound in Reason 4
Routing

Step 7: We want to be able to route this beat to two different places: the mixer, so that we can hear it, and the compressor’s sidechain input. This is done using a Spider Audio Merger & Splitter. While you’re at it, create an MClass Compressor to perform the sidechain compression.

How to make a filthy electro sound in Reason 4
More routing

Step 8: Flip the rack around and route the output of the Redrum to the Spider Audio unit’s input. Take one of the Splitter’s outs over to the compressor’s Sidechain input, and another out to the Mixer. Connect Scream 4’s output to the Compressor’s audio input, and the Compressor’s audio output to the Mixer.

How to make a filthy electro sound in Reason 4
Sidechain compression

Step 9: Return to the front view of the rack and you’ll be see the Gain reduction meter on the Compressor pumping in time with the beat. You can now use the Threshold and Ratio controls to set the amount of compression - for a more aggressive effect, turn down the Compressor’s Release time.

TopView classic version